W-SFM machine setting tool
MASTGTL-(W-SFM)-(M8-M16)
Art.-no. 0904908016
EAN 4049557418636
Individual price display after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 073 – 629 1911.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
For the quick and convenient driving of Würth Fixanchors with the rotary hammer drill.
- Easy handling - suitable for SDS-plus.
- Particularly suitable for economical series installation.
- Optimal and even power transmission - therefore low manual insertion energy.
- Clean, centric anchor insertion - ideal for the Fixanchor connecting thread due to the tapered chuck.
- Shorter installation time.
- Also ideal for overhead mounting and for difficult-to-access fastenings (e.g. railings/pipe suspensions).
- High-quality steel ensures a long service life.
Create the drill hole
10
Knock in anchor with mason's mallet or machine setting tool
Set anchor in place
Apply torque
| Usable anchors | ||
| Product profile | Designation | Sizes |
| 02.5 | Fixanchor W-FAZ/S | M8-M16 |
| 02.6 | Fixanchor W-FAZ/A4 | M8-M16 |
| 11.1 | Fixanchor W-FA/S | M8-M16 |
| 11.1 | Fixanchor W-FA/hot-dip galvanised | M8-M16 |
| 11.2 | Fixanchor W-FA/A4 | M8-M16 |
| HCR anchors available via special procurement | ||
Product information
Datasheets(X)
Application area
- Can be used for anchor sizes M8 to M16.
Instructions
- Insert the setting tool with the drive arbor suitable for SDS-plus into the WÜRTH rotary hammer drill.
- Place the setting tool chuck on the Fixanchor thread and mechanically place the anchor in the pre-drilled and cleaned drill hole.
- Install the anchors using a torque wrench and the specified torque (see the product information for the anchor).
Suitable for anchor diameter | 8 mm, 10 mm, 12 mm, 16 mm |