Tapping and chipping hammer BMH 40-BL
HAMDRLCHPNGHAM-EL-(BMH40-BL)
Art.-no. 07025541
EAN 4056807897868
Register now and access more than 125,000 products
Maintenance-free and durable
- Brushless motor
- Suitable for tough construction site conditions
- Robust die-cast aluminium housing
Ideal when working in softer materials
- Control electronics with stepless speed and stroke rate adjustment
- Consistent speeds under load
- Feedback control with stepless speed and stroke rate adjustment
Fatigue-free and safe working
- 12 chisel settings allow adjustment to different working angles during chiselling work
- Safety slip clutch mechanically decouples the drive if the drill jams
3 Years Warranty on manufacturing and material defects
Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.
Datasheets(X)
Nominal voltage | 230 V/AC |
Frequency | 50 Hz |
Protection class | Protection class II/protective insulation |
Power input | 1150 W |
Power output | 650 W |
Min./max. idle speed | 250-500 rpm |
Min./max. impact rate | 1430-2850 rpm |
Tool holding device | Suitable for SDS-max |
Impact energy | 8.7 J |
Min./max. drilling diameter in concrete | 12-40 mm |
Min./max. recommended drilling range for optimum performance (in concrete) | 25-35 mm |
Max. drilling diameter of breakthrough drill in concrete | 65 mm |
Max. drilling capacity (volume) in concrete per minute | 1 cm³ |
Max. chiselling power in concrete | 200 kg/h |
Max. drilling diameter of hollow drill bit in masonry | 105 mm |
Weight of machine | 7.5 kg |
Cable length | 3.8 m |
MAINTSPR-CONCENTRATE-100ML
If you do not know the packaging unit when entering the item number directly in the shopping cart or when registering with Easy-/VarioScan, you can simply leave the box empty. A packaging unit is automatically determined here.
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price always corresponds to the displayed packaging, For example, A PU of 250 pcs means the price for 250 pcs. A PU of 300 pcs means the price for 300 pcs. A PU of 10 m means the price for 10 metres.
Price with price code display (PSL):
The price always applies to a quantity that is arranged via a price code:
/1pc means price for 1piece
/100 pcs means price for 100 pieces
/10 m means price for 10 meters