Special undercoating
UBS-SPECIAL-BLACK-500ML
Register now and access more than 125,000 products
- Excellent adhesion to wood
- Tested compatibility with commercially available
- wood impregnation compounds
- Excellent anti-humming effect
- No run-off on vertical surfaces
- High resistance to ageing
Store the product in a cool, dry place. Recommended storage temperature +10 °C to +30 °C. Protect from direct sunlight. Product can be removed again after application with thinner. Once dried, the product can be removed again only by mechanical means. After use, turn the can upside down and spray until the valve is empty.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
Special undercoating for use on wooden underbodies of caravans, motor homes, trailers etc. Moisture exchange in wood is ensured by the breathable properties of the undercoating. The penetration of moisture and other environmental influences is prevented.
Shake can well before using. The surface must be dry, clean and free from rust and grease. Optimal spraying distance 30 cm. With thicker coats, allow intermediate coats to flash off.
Chemical basis | Mix naphtha, solvent, propellant |
Surface pre-treatment required | Surface must be clean, dry and free from rust and grease. |
Contents | 500 ml |
Weight of content | 406 g |
Colour | Black |
Min. proportion of solids | 33 % |
Min./max. temperature resistance | -25 to 80 °C |
Conditions for through drying | at 20°C, 65% relative humidity |
Min. spraying distance | 30 cm |
Conditions for skin-formation time | 20°C, Ri 0 at 65% relative humidity, 100 µ wet layer thickness |
Min. skin-formation time | 75 min |
Drying time | 135 min |
Conditions for drying time | at 20°C and 65% relative humidity |
Density | 0.79 kg/l |
Density conditions | at 20°C |
Shelf life from production | 24 Month |
Max. temperature resistance | 80 °C |
Min. temperature conditions | -25 °C |
Min. temperature resistance | -25 °C |
Recoatable/Can be painted over | No |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!