Socket tester A with FI/RCD tripping
Electrical socket tester A FI/RCD activation
TEST-SKT-SAFECNTCT-FI-TEST-230V/50HZ
Art.-no.
5634006001
EAN 4099618533327
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 073 – 629 1911.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Enables quick and safe testing of safety sockets for connection faults. GFCI/RCD test circuit (30 mA at 230 V/AC)
- The safety socket is checked for possible installation errors such as swapped wires and interruptions
- The test result is visually displayed using three LEDs
- Power supplied by the outlet to be tested, no batteries required
- Compact, lightweight design
- Simple operation/handling
IEC/EN 61010-1 (DIN VDE 0411)
Before using the device, be sure to observe the safety instructions and warning notices in the operating instructions.
Product information
Datasheets(X)
Application area
- For testing safety sockets, cable reels and extension leads etc.
- Fault current protection testing
Design | With FI/RCD trigger |
Display | LED |
Min./max. voltage range AC | 220-240 V/AC |
Min./max. frequency | 50 / 60 Hz |
Switchable load | 30 mA at 230V/AC |
IP protection class | IP 40 |
Overvoltage protection category | CAT II/300 V |
Min./max. temperature conditions | 0 to 50 °C |
Material | ABS/PC |
Colour | Grey, Black |