Skirting board nails Small flat head Steel, brown
Threaded nail, steel, brown
NAIL-THR-BSEBRD-PANHD-SMALHD-BRWN-4,5X30
Art.-no.
047878 400
EAN 4050641864314
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 073 – 629 1911.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Advantages in relation to other methods:
- Cheaper and quicker.
- No annoying stripping back, as there can be with plugs.
- Less noticeable due to very small head.
- Seamless tightening on hollow or rounded walls.
Special hardened steel with small, flat head and very precise oblique ridges turned in the shaft, so that high extraction resistance is achieved.
Product information
Datasheets(X)
Application area
Attaching wooden skirting boards (including pine, meranti) to walls made of prefab concrete or sand-lime brick, but also walls made of softer materials such as aerated concrete.
Instructions
Drill a hole of Ø 4 mm through the skirting board into the wall. Knock in the skirting board nail, which will turn so that it is firmly lodged in the concrete with high extraction resistance. Use 30 mm nails for concrete and 40 mm nails for sand-lime brick.
Drill a hole of Ø 4 mm through the skirting board only, not into the subsurface. Knock in a 40 mm skirting board nail. Please note: Knock in white skirting board nails with a plastic hammer.
Prefab concrete and limestone:
Drill a hole of Ø 4 mm through the skirting board into the wall. Knock in the skirting board nail, which will turn so that it is firmly lodged in the concrete with high extraction resistance. Use 30 mm nails for concrete and 40 mm nails for sand-lime brick.
Aerated concrete:
Drill a hole of Ø 4 mm through the skirting board only, not into the subsurface. Knock in a 40 mm skirting board nail. Please note: Knock in white skirting board nails with a plastic hammer.
 | |
Nominal diameter (d1) | 4.5 mm |
Length (L) | 30 mm |
Material | Steel, specially hardened |
Surface | Zinc plated |