Safety long-life brush Steel, joined to shank
Safety wheel brush with shank
WHLBRSH-SHNK-PWRDRL-SAV-D60X8X6MM
Art.-no.
5465000600
EAN 4065746779036
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 073 – 629 1911.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Suitable for medium-duty brushing work such as deburring, cleaning and derusting. Ideal for spot work on steel and cast metal.
- No premature breaking of wires
- The bristle width remains consistent during machining thanks to the wheel brush with wire held in a plastic ferrule
- For use on die grinders and drills
Notice
- Enhanced safety by preventing premature wire breakage
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Always wear safety goggles and safety gloves when working with machine brushes!
Product information
Datasheets(X)
Application area
- For removing rust, paint, corrosion etc.
- Cleaning welding seams
- For roughening rubber
 | |
Diameter x usable width x shaft diameter (DxAxS) | 60 x 8 x 6 mm |
Usable length of wire (H) | 18 mm |
Wire diameter | 0.3 mm |
Material of wire | Steel |
Surface | 0 - not applicable |
Design | Corrugated, bound in plastic |
Aggressiveness | Hard |
Suitable for cordless drills (points system) | 2 of 4 points |
Suitable for drill (points system) | 2 of 4 points |
Suitable for straight grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Max. rotation speed | 15000 1/min |