Quick-action clamping nut Fixtec
Quick action lock nut Fixtec for angle grinder
QCKLOKNUT-FIXTEC-F.ANGLGRIND-UPTO150MM
Art.-no.
0702480900
EAN 4024835518253
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 073 – 629 1911.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Tool-free changing of abrasives for angle grinders. Tightened and released by hand
For angle grinders up to max. Ø 150 mm with commercially available M14 spindle thread
If necessary, quick-action nut can also be loosened with face wrench
- Holes are located below the clip
- Use suitable face wrench
Notice
Once the clamping flange and separating or roughing wheel are mounted, the free grinding spindle length must be at least 3 mm.
Instructions
Fold up clip and screw nut on clockwise with grinding spindle locked. Fold clip back in.
 | |
Diameter | 49 mm |
Height | 9 mm |
Product information
Datasheets (0)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
