Push-through perforated sleeve SH for BASIC WIT-PM 200 and ALLROUNDER WIT-VM 250 PRO injection systems
Push-through perforated sleeve SH
ANC-SH-PLA-TRANP-16X330MM
Art.-no.
090344 163
EAN 4050641890634
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 073 – 629 1911.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Masonry, individual fixing point
- Anchor rods W-VI-A are held centrally in the perforated sleeve during installation
- The perforated sleeve collar can be shortened to the appropriate fixture thickness (wooden beam + plaster thickness)
- Individual fixing point in masonry: BASIC WIT-PM 200, anchor rod W-VI-A, conventional threaded rod with acceptance certificate
- Individual fixing point in masonry: ALLROUNDER WIT-VM 250, anchor rod W-VI-A, conventional threaded rod with acceptance certificate
Product information
Datasheets(X)
Application area
For anchoring in solid and perforated brick masonry
Type description | SH 16 x 130/200 |
Diameter | 16 mm |
Length | 330 mm |
Material | Plastic |
Nominal drill-bit diameter (d 0) | 16 mm |
Drill hole depth (h 0) - condition | 135 mm (+t fix) |
Effective anchoring depth (h ef) | 130 mm |
Suitable for anchor rod | M8 |
Suitable for female thread sleeve | 0 - not applicable |
Required injection mortar | WIT-PM 200, WIT-VM 250 |
Approval | ETA-13/0037, ETA-20/0854 |