Non-slip, photoluminescent hazard warning adhesive tape
HAZDWARNTPE-SA-NONSLP-YELL/BLACK-25MMX6M
Art.-no. 081244 675
EAN 4056807861074
Register now and access more than 125,000 products
Photoluminescent
- Increases safety in dark areas, reducing the incidence of slips and falls.
- Particularly useful when markings must remain clearly visible in darkness or in the event of a power cut
For light to medium stress
- Withstands heavy foot traffic and light pallet truck traffic.
- R13 non-slip rating in accordance with DIN EN 16165.
Easy to apply
- Self-adhesive and easy to apply.
- Can be walked on immediately after application.
Versatile application
- Ideal for walkways, work areas, machinery, vehicles and other areas subject to slip hazards.
- Supports the meeting of marking and occupational safety requirements (e.g. colour-coded hazard warning, 5S).
Aluminium oxide grit
- Bonded by means of an epoxy resin sealant and an acrylic copolymer adhesive with a low-temperature-resistant PVC film.
- Durable.
- Waterproof, chemical-resistant and mineral oil-resistant.
- The luminosity will decrease slightly over time.
- Revolving and turning on the tape by industrial trucks or other heavy vehicles as well as pushing pallets over the tape should be avoided. This can damage the tape.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result.
Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
Ideal for non-slip marking of floors, stairs, ramps, machines, vehicles and many other indoor areas and weather-protected outdoor areas. The fluorescent, photoluminescent layer prevents slips and reliably ensures safety in all light conditions.
For optimal adhesion, the surface must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. On certain surfaces and in outdoor areas, it is recommended to additionally use the butyl primer - particularly on concrete and asphalt, on untreated or uncoated wood and on rough or grained surfaces.
To increase adhesion and durability, the hazard warning adhesive tape should be pressed down firmly after application. A press-on roller is ideal for this.
Colour | Yellow-black |
Material | PVC - Polyvinyl chloride |
Surface structure | Aluminium oxide grit |
Adhesive base | Acrylate |
Length | 6 m |
Width | 25 mm |
Thickness | 850 µm |
Min./max. processing temperature | 12 to 40 °C |
Min./max. temperature conditions | -5 to 50 °C |
Shelf life from production/conditions | Unlimited / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!