Lipclip With moisture drainage
Lipclip
LIPCLIP-M-VOCHTAFVOER-PE-D4XD80-34210
Art.-no.
9501000638
EAN 8714318113353
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 073 – 629 1911.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Insulation holder with lip for moisture drainage to the outer surface.
Insulation placement
This clip is placed around a cavity wall tie with a diameter of 4 mm to ensure that the insulation material remains in the correct place in the cavity.
Secure moisture drainage
Moisture is safely drained to the outer wall up to a cavity width of 50 mm, even where cavity wall ties have to be placed facing inwards.
Product information
Datasheets(X)
Instructions1. Slide the LIPCLIP from top to bottom over the centre of the cavity wall tie.
2. Bend the short lip to the long lip, after centring.
3. Press the closing membrane behind the LIPCLIP.
4. Press the LIPCLIP against the insulation material.
2. Bend the short lip to the long lip, after centring.
3. Press the closing membrane behind the LIPCLIP.
4. Press the LIPCLIP against the insulation material.
Material | PE - Polyethylene |
Suitable for cavity wall tie | Ø 3,6 – 4,5 mm |
Washer diameter | 80 mm |
Diameter | 4 mm |
Colour | Blue |