Insulation holder W-DH
Insulation holder W-DH
DWL-(W-DH)-PLA-D50MM
Art.-no.
090378050
EAN 4011231847841
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 073 – 629 1911.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
For fastening insulation tarpaulins or plastic sheets to wooden frames using a suitable wood screw (e.g. A® 4)
- High-quality polypropylene (PP)
- Thermally stable from -40 °C to +100 °C
- Quick and easy installation
- Insulation washer can be used with nail anchors
- Insulation washer can be fastened to wood using chipboard screws
Drill hole
Insert peg completely through disk into the drill hole
Knock in expansion nail until flush
Finished
Insert screw through disk
Screw in screw until flush
Finished
Product information
Datasheets(X)
Application area
- Securing tarpaulins and plastic sheets in the construction sector
- Base ∅ 50 mm For attaching hard, self-supporting insulation material, e.g. polystyrene
- Base ∅ 90 mm: for fastening soft insulation material, e.g. rock wool and glass wool
- To be used in concrete and masonry in conjunction with nail anchors ∅ 8 mm
- To be used in wood in conjunction with chipboard or wood screws with a min. head ∅ 12 mm
Type description | W-DH |
Disc diameter | 50 mm |
Inside diameter of hole (d hole) | 9 mm |
Disc height (h disc) | 7 mm |
Countersink diameter (d count) | 14 mm |
Material | PP - Polypropylene |
| Performance data | |||
| Holder diameter [mm] | 50 and 90 | ||
| Recommended Tensile load | in conjunction with nail anchor | Frec. [kN] | 0.10 washer bends backwards in the event of an overload |
| in conjunction with chipboard screw | 0.10 washer bends backwards in the event of an overload | ||
| Recommended transverse load | in conjunction with nail anchor | Frec. [kN] | Max. 0.15 see performance data 93 nail anchor W-ZND |
| in conjunction with chipboard screw | max. 0.15 depending on the bending movement of the chipboard screw | ||
| Characteristic values | ||
| Drill hole depth | t ≥ [mm] | 45 |
| Setting depth | hS ≥ [mm] | 40 |
| Minimum component thickness | d ≥ [mm] | 500 |
| Nominal drill∅ | ddrl. [mm] | 8 in masonry and concrete |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!