Impact anchor W-SD WSS 2/L
Impact anchor W-SD WSS 2/L
DWL-(W-SD/W-WSS2/L35)-(A2K)-M6X40
Art.-no. 0905700510
EAN 4024835245661
Register now and access more than 125,000 products
A stop drill bit must be used (approval applies to use with a stop drill bit)
Anchors and stop drill bits form a perfectly co-ordinated system. The system avoids installation errors and ensures attachment as specified in the approval.
- WSS: Pre-mounted unit (plug, insulating part and hanger) ensures quick, easy installation
- Sound dampening directly in the ceiling itself ensures long-lasting, correct technical implementation of DIN 4109
- Immediate load-bearing capacity - no waiting
- Minimal hanging height
Dimensions in accordance with the European Technical Approval Guidelines (ETAG) for "Metal plugs for use in concrete", appendix C, measurement process C
Fire resistance period (base material: concrete C20/25 up to and including C50/60): R30, R60, R90, R120: Technical report TR 020 "Evaluation of anchorages in concrete with respect to fire resistance period" (included in ETA-07/0138)
Drill the hole
Knock in anchor with setting tool until flush
Mount component
Dimensions in accordance with the European Technical Approval Guidelines (ETAG) for "Metal plugs for use in concrete", appendix C, measurement process C
Fire resistance period (base material: concrete C20/25 up to and including C50/60): R30, R60, R90, R120: Technical report TR 020 "Evaluation of anchorages in concrete with respect to fire resistance period" (included in ETA-07/0138)
Datasheets(X)
Quick assembly system for mounting M8 threaded rods
Anchor diameter | 6 mm |
Anchor length (l) (l) | 61 mm |
Nominal drill-bit diameter (d 0) | 6.0 mm |
Type description | W-SD W-WSS 2/L-35 |
Centre-to-centre distance (a) | 200 mm |
Edge clearance (a r) | 100 mm |
Minimum component thickness (d) | 100 mm |
Drill hole depth (t) | 42 mm |
Performance details | ||
Anchor diameter [mm] | WSS 2/L-35 | |
Anchors in a redundant non-structural system in concrete (For all load directions) for c ≥ 150 mm for s ≥ 200 mm | Fapp [kN] ≥ C20/25 and ≤ C50/60 | 1,4 |
Approved load with exposure to fire (R30, R60, R90, R120), see European Technical Approval ETA-07/0138 | ||
Characteristic values | ||
Axial clearance | scr ≥ [mm] | 200 |
Edge distance | ccr ≥ [mm] | 150 |
Drill hole depth | h1 ≥ [mm] | 42 |
Effective anchorage depth | hef ≥ [mm] | 36 |
Minimum element thickness | hmin ≥ [mm] | 80 |
Thread diameter | dthr [mm] | 6 |
Nominal drill diameter** | d0 [mm] | 6 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!