Edge form anchor AS 20
Rim formwork tie AS 20
R.BEK.ANK-AS-(SZN)-34X107X30X2-101340
Register now and access more than 125,000 products
Datasheets(X)
2. Install concreteplex and tie to reinforcement with plaited wire.
3. Where there are openings underneath the wide slab floor, nail down the edge formwork anchor on the wide slab floor above with Z1 rivet nails. The undershot can then remain shorter so that the closing façade can be placed.
Material | Steel |
Surface | Sendzimir galvanized |
Height | 34 mm |
Height 2 | 20 mm |
Length | 107 mm |
Length 2 | 83 mm |
Width | 30 mm |
Suitable for floor height | 100 mm |
Thickness | 2 mm |
Hole pattern masonry connector | 5/3-2/4,5-1/6,5 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!