Welcome to Würth Netherlands For trade customers only
Diamond impact drill EDSB 160-E - IMPDRL-EL-DIA-EDSB160-E Diamond impact drill EDSB 160-E - IMPDRL-EL-DIA-EDSB160-E Diamond impact drill EDSB 160-E - IMPDRL-EL-DIA-EDSB160-E Diamond impact drill EDSB 160-E - IMPDRL-EL-DIA-EDSB160-E Diamond impact drill EDSB 160-E - IMPDRL-EL-DIA-EDSB160-E Diamond impact drill EDSB 160-E - IMPDRL-EL-DIA-EDSB160-E
Diamond impact drill EDSB 160-E - IMPDRL-EL-DIA-EDSB160-E - 1
Diamond impact drill EDSB 160-E - IMPDRL-EL-DIA-EDSB160-E - 2
Diamond impact drill EDSB 160-E - IMPDRL-EL-DIA-EDSB160-E - 3
Diamond impact drill EDSB 160-E - IMPDRL-EL-DIA-EDSB160-E - 4
Diamond impact drill EDSB 160-E - IMPDRL-EL-DIA-EDSB160-E - 5
Diamond impact drill EDSB 160-E - IMPDRL-EL-DIA-EDSB160-E - 6

Diamond impact drill EDSB 160-E

Diamond hammer drill EDSB 160-E
IMPDRL-EL-DIA-EDSB160-E
MASTER

Art.-no. 57083001
EAN 4061975076090
All versions

Prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 125,000 products

Robust diamond impact drill with anti-vibration handle and powerful 1500 watt motor

Anti-vibration system with long additional handle



High power reserve


Powerful 1500 W motor provides power and power reserves



High degree of machine safety


Electronic and mechanical safety coupling



Wide range of applications


Additional impact function allows drilling in sand-lime brick



Robust metal gear housing



Speed control



Soft start

Notice
  • Use without impact function for dry drilling

  • Impact mechanism can be switched on if necessary

3 Years Warranty on manufacturing and material defects


Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Ideally suited for drilling socket outlets

Nominal voltage

230 V/AC

Min./max. frequency

50 / 60 Hz

Protection class

Protection class II/protective insulation

Power input

1500 W

Power output

820 W

Idle speed 1st/2nd gear min./max.

0-1500 / 0-3000 rpm

Impact rate

48000 rpm

Max. drilling diameter in steel

16 mm

Drill chuck holder

5/8 inch x 16 UNF

Min./max. drill chuck span width

3-16 mm

Length x height

450 x 145 mm

Weight of machine

4.4 kg

Cable length

4 m

Included in delivery

Keyed drill chuck, additional handle

Diamond impact drill EDSB 160-E including:
Empty case for EDSB 160-E
1 x
Empty case for EDSB 160-E

CASE-EMPTY-(EDSB 160-E)

Quantity: 1 x
Toothed ring drill chuck
1 x
Toothed ring drill chuck

DRLCHUK-KEYED-KEY-5/8IN-(3-16)

Description: Suitable for universal use
Quantity: 1 x
Depth stop
1 x
Depth stop

DEPTH GAUGE

Quantity: 1 x
Handle
1 x
Handle

SP-HANDLE

Quantity: 1 x
The packaging unit indicates the number of pieces/meters/kilos contained in the packaging. In the catalog section you can choose from the different packaging units when a selection menu appears.

If you do not know the packaging unit when entering the item number directly in the shopping cart or when registering with Easy-/VarioScan, you can simply leave the box empty. A packaging unit is automatically determined here.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price always corresponds to the displayed packaging, For example, A PU of 250 pcs means the price for 250 pcs. A PU of 300 pcs means the price for 300 pcs. A PU of 10 m means the price for 10 metres.

Price with price code display (PSL):
The price always applies to a quantity that is arranged via a price code:
/1pc means price for 1piece
/100 pcs means price for 100 pieces
/10 m means price for 10 meters
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
U90-S diamond socket cutter
U90-S diamond socket cutter

SKTCTR-DIA-U90S-D82MM-WL70MM

ZEBRA
Extremely versatile premium socket outlet drill bit with very fast drilling speed and long service life, including connecting thread M16 and perforated cover for dust extraction
x 1 pcs
U90 diamond socket cutter
U90 diamond socket cutter

SKTCTR-DIA-U90-D82MM-WL70MM

ZEBRA
Extremely versatile premium socket outlet drill bit with very fast drilling speed and long service life, including M16 connecting thread
x 1 pcs
PKD diamond socket cutter
PKD diamond socket cutter

SKTCTR-DIA-PKD-D82MM-WL70MM

The ideal solution with particularly fast drilling speed for extremely high-compacted sand-lime brick, plus connecting thread M16.
x 1 pcs
Centre punch
Centre punch

CENTMNDRL-F.SKTCTR-SHRT-L70MM

ZEBRA
Simple short design with specially aligned spring tension for normal drill bits for socket outlets
x 1 pcs
Quick-change direct mount Magnetic
Quick-change direct mount Magnetic

MNT-DRLBIT-PKD-QUICK-(5/8IN-16UNF)

With integrated quick-change nut and magnetic centring pin mount
x 1 pcs
Single direct adapter Magnetic
Single direct adapter Magnetic

MNT-DRLBIT-PKD-BASIC-(5/8IN-16UNF)

With magnetic centring pin mount
x 1 pcs
Adapter For centring pins
Adapter For centring pins

ADAPT-CREDRLBIT-(5/8IN-16UNF)XM16

For adaptation to all common machine types in conjunction with taper adapters
x 1 pcs
Centre punch magnetic
Centre punch magnetic

CENTMNDRL-MAGN-SKTOTLT-DBIT-L70MM

With spring tension specially set for PKD socket cutters
x 1 pcs
Dust extraction For socket cutters without quick-change function
Dust extraction For socket cutters without quick-change function

DSTEXTR-F.SKTCTR

For virtually dust-free drilling
x 1 pcs
Dust extraction For socket cutters with quick-change function
Dust extraction For socket cutters with quick-change function

DSTEXTR-F.SKTCTR-W.QCKCHFUNCT

For tool-free core bit changes and virtually dust-free drilling
x 1 pcs
Centre drill bit For socket cutter
Centre drill bit For socket cutter

DRL-CENT-SKTCTR-D8MM-L150MM

Precision drill for precise spot drilling in combination with socket outlet drill bits.
x 1 pcs
Centre drill bit For socket cutter
Centre drill bit For socket cutter

DRL-CENT-SKTCTR-PLUS-SHORT-D8-L150

Precision drill for precise spot drilling in combination with socket outlet drill bits.
x 1 pcs
Socket cutter mount For centre drill bit
Socket cutter mount For centre drill bit

MNT-SKTCTR-M18X2,5XM16

Mount with M16 thread for use of socket outlet drill bits with centre drills, includes matching Allen key for changing drill bits.
x 1 pcs
Dust extractor Plus
Dust extractor Plus

DSTEXTR-F.SKTCTR-PLUS

x 1 pcs
Plus dust extractor For socket cutters with quick-change function
Plus dust extractor For socket cutters with quick-change function

DSTEXTR-W.QCKCHFUNCT-F.SKTCTR-PLUS

With integrated quick-change mount for tool-free core bit changes and virtually dust-free drilling
x 1 pcs
Sharpening stone For diamond cutting discs, cup wheels and core drill bits (excl. PCD)
Sharpening stone For diamond cutting discs, cup wheels and core drill bits (excl. PCD)

WHETSTN-320X160X30MM

Restore original cutting ability by simply drilling or cutting into the whetstone
x 1 pcs
The packaging unit indicates the number of pieces/meters/kilos contained in the packaging. In the catalog section you can choose from the different packaging units when a selection menu appears.

If you do not know the packaging unit when entering the item number directly in the shopping cart or when registering with Easy-/VarioScan, you can simply leave the box empty. A packaging unit is automatically determined here.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price always corresponds to the displayed packaging, For example, A PU of 250 pcs means the price for 250 pcs. A PU of 300 pcs means the price for 300 pcs. A PU of 10 m means the price for 10 metres.

Price with price code display (PSL):
The price always applies to a quantity that is arranged via a price code:
/1pc means price for 1piece
/100 pcs means price for 100 pieces
/10 m means price for 10 meters
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details