Hexagon nut, self-locking Stainless steel A2, galvanised
DIN 985 stainless steel A2 zinc plated
NUT-HEX-SLOK-DIN985-A2-(ZN)-M6
Art.-no.
039196
EAN 4050641870421
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 073 – 629 1911.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
- Nut with limited load capacity
- No damage to the thread surface
- Ambient temperature: -70°C to +120°C
- Due to the zinc layer, ideal for avoiding cold welding.
NoticeHexagon nuts that comply with the retracted DIN 985 standard and have a lower nominal height must not be loaded with the test force according to DIN EN ISO 20898-2.
These nuts can be identified by the vertical bar on either side of the strength class (e.g. I8I).
DIN 985 has been replaced by ISO 10511, 10512 and 7040.
These nuts can be identified by the vertical bar on either side of the strength class (e.g. I8I).
DIN 985 has been replaced by ISO 10511, 10512 and 7040.
Product information
Datasheets(X)
Application areaIn situations where cold-welding is to be avoided.
InstructionsWhen the bolt-nut connection is established, the thread of the screw is secured in the plastic washer. This generates clamping force between the thread profiles. Due to the high level of friction, this clamping force generates the locking torque necessary to maintain the preload force.
 | |
Thread type x nominal diameter (D) | M6 |
Height (m1) | 6 mm |
External drive (s1) | WS10 |
Standards | DIN 985 |
Material | Stainless steel A2 |
Surface | Zinc plated |
RoHS-compliant | Yes |
Form | Low |