Concrete specialist injectable mortar WIT-VIZ - ANC-MORT-(WIT-VIZ)-CART-420ML

Concrete specialist injectable mortar WIT-VIZ - ANC-MORT-(WIT-VIZ)-CART-420ML - 1

Concrete specialist injectable mortar WIT-VIZ - ANC-MORT-(WIT-VIZ)-CART-420ML - 2

Concrete specialist injectable mortar WIT-VIZ

Name: Concrete specialist injectable mortar WIT-VIZ
Brand: Würth
SKU: 0905440004

Conc. specialist chemical injection mortar WIT-VIZ
ANC-MORT-(WIT-VIZ)-CART-420ML

Art.-no. 0905440004

EAN 4062856577002

All versions

Similar products

Prices for customers after login

Concrete specialist injectable mortar WIT-VIZ

Art.-no. 0905440004

Prices for customers after login

Quantity

Show availability in Würth trade store

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: 073 – 629 1911

Composite mortar for extreme loads in concrete (injection systems F-VIZ) and fatigue-related influences (injection system W-VIZ dynamic)

2-component reactive resin mortar, styrene-free

150 ml, 330 ml and 420 ml cartridges can be reused by replacing the mixer nozzle or by resealing with the sealing cap

Individual fixing point, cracked and uncracked concrete: Anchor rod W-VIZ-A or internally threaded sleeve W-VIZ-IT

Individual fixing point, dynamic: Anchor rod W-VIZ-A dynamic and W-VIZ-AV dynamic

Proof of Performance

European Technical Assessment ETA-04/0095: Chemical injection mortar WIT-VIZ + anchor rod W-VIZ-A or female thread sleeve W-VIZ-IG

General technical approval Z-21.3-1909: Injection mortar WIT-VIZ + anchor rod W-VIZ-A dynamic Seismic performance category C1 and C2 (W-VIZ-A M10 to M24)

Application area

Fastening of railings

Robot systems (fatigue-related influences)

High bays

Create the drill hole

From W-VIZ M10:

Make the drill hole with the Würth hollow drill bit. Hole cleaning can be dispensed with

Clean the drill hole

2x blow out, 2x mechanical brush out, 2x blow out

Blow out with compressed air from M20 drilled hole

Measure temperature

Screw mixer onto cartridge

Discard the first section of mortar (until the mortar is uniformly coloured - approx. 10 cm)

Fill injection mortar starting from base of drill hole

Press in anchor rod up to drill hole base while turning slightly

Visual check of mortar filling quantity, setting depth marking

Observe the injection mortar curing time

Install component, apply installation torque

Create the drill hole

From W-VIZ M10:

Make the drill hole with the Würth hollow drill bit. Hole cleaning can be dispensed with

Clean the drill hole

2x blow out, 2x mechanical brush out, 2x blow out

Blow out with compressed air from M20 drilled hole

Measure temperature

Screw mixer onto cartridge

Discard the first section of mortar (until the mortar is uniformly coloured - approx. 10 cm)

Fill injection mortar starting from base of drill hole

Push in female-thread anchor while turning slightly

Carry out visual check and comply with composite mortar hardening time

Remove extruded mortar and protective cap

Install component; maximum torque may not be exceeded

Create the drill hole

Clean drill hole (blow out 2 x, brush out mechanically 2 x, blow out 2 x), with M20 and larger, blow out with pneumatic air (pneumatic air nozzle)

Screw mixer onto cartridge

Before use, press out approx. 10 cm cord. Do not use this initial mortar!

Fill injection mortar starting from base of drill hole

Press in anchor rod up to drill hole base while turning slightly

Observe the injection mortar curing time

After the hardening time, remove extruded mortar

1. Apply installation torque

2. Screw on the locking nut, then tighten with a wrench ¼ to ½ a turn

European Technical Assessment ETA-04/0095: Chemical injection mortar WIT-VIZ + anchor rod W-VIZ-A or female thread sleeve W-VIZ-IG

General technical approval Z-21.3-1909: Injection mortar WIT-VIZ + anchor rod W-VIZ-A dynamic Seismic performance category C1 and C2 (W-VIZ-A M10 to M24)

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents

Click here for the complete CAD library

Application area

Anchor rod W-VIZ-A: Railings, metal structures and profiles, brackets, supports, steps etc.

Anchor rod W-VIZ-IG: Railings, metal structures and steps etc.

Anchor rod W-VIZ-A dynamic: Slewing cranes, crane runways, ventilation fans, welding robots, conveyors, street signs, etc.

Type description	WIT-VM 100
Container	Coaxial cartridge
Contents	420 ml
Included in delivery	Mortar cartridge 420 ml (coaxial) + 1 x mixer nozzle
Suitable application gun	Battery-powered application gun 420ml, Application gun MULTI, Application gun WIT 420ml, Pneumatic application gun 420ml, EasyMax 420 ml, HandyMax 420 ml
Min./max. processing temperature /conditions	-5 to 40 °C / temperature in the anchorage ground during processing and hardening
Min./max. ambient temperature / Conditions	-40 to 120 °C / after completely curing process
Temperature resistance, long-term temperatures max.	72 °C
Temperature resistance, short-term temperatures max.	120 °C
Shelf life from production/conditions	18 Month / cool and dry storage area, 5°C to 25°C
Approval	ETA-04/0095, DIBt Z-21.3-1909, ETA-18/0979
Chemical basis	Vinylester, styrene free
Colour	Grey

Required accessory:

Product

Description

Quantity

Price
/PU

Cordless application gun WIT

APPLGUN-CORDL-ANC-WIT-M-KST-420ML

Art.-no. 0891003420

Powerful Li-ion battery-powered application gun for WIT cartridges

x 1 pcs

Application gun WIT

APPLGUN-ANC-(WIT-420ML)

Art.-no. 08910380

For applying 380 ml, 410 ml and 420 ml WIT cartridges

x 1 pcs

Application gun HandyMax

APPLGUN-ANC-HANDYMAX-(F.WIT)-310ML

Art.-no. 0891007

For pressing out WIT cartridges (150 ml, 320 ml, 330 ml)

x 1 pcs

FILL & CLEAN static mixer

MIX-DWL-PLA-WIT

Art.-no. 0903420001

For WIT cartridges of WIT-VM 250, WIT-VM 100, WIT-Nordic, WIT-Express, WIT-PM 200, WIT-EA 150 systems with cleaning element

x 10 pcs

The packaging unit indicates the number of pieces/meters/kilos contained in the packaging. In the catalog section you can choose from the different packaging units when a selection menu appears.

If you do not know the packaging unit when entering the item number directly in the shopping cart or when registering with Easy-/VarioScan, you can simply leave the box empty. A packaging unit is automatically determined here.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price always corresponds to the displayed packaging, For example, A PU of 250 pcs means the price for 250 pcs. A PU of 300 pcs means the price for 300 pcs. A PU of 10 m means the price for 10 metres.

Price with price code display (PSL):
The price always applies to a quantity that is arranged via a price code:
/1pc means price for 1piece
/100 pcs means price for 100 pieces
/10 m means price for 10 meters

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additional accessory:

Product

Description

Quantity

Price
/PU