Calibration board Mazda type 2 and Mitsubishi ACS cars
Calibr. board Mazda type 2 & Mitsubishi ACS cars
CALIBBDR-ACS-CARS-TARGET-TFC9+TFC10
WOW
Art.-no.
W074210004
EAN 4061975685353
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 073 – 629 1911.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
For the static calibration of camera-based driver assistance systems
- Two boards printed separately and on both sides
- For vehicles from the manufacturers: Mazda type 2 and Mitsubishi
Notice
The adjustment rails W074210008 are required to use the boards!
Instructions
The calibration boards are pushed into the adjustment rails from the outside and aligned according to the setting values from the diagnostics software using the markings. Start the calibration process using the steps specified in the diagnostic software.
Width | 520 mm |
Length | 840 mm |
Height | 3 mm |
Product weight (per item) | 3.200 kg |
Product information
Datasheets (0)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
