Basic UV leak detection additive
A/C-UV leak detection Basic
LKDETRADD-A/C-BASIC-240ML
Register now and access more than 125,000 products
- Sufficient for 32 applications for a car or 16 applications for a commercial vehicle
- Compatible with PAG and ester oil
- High proportion of fluorescent ingredients
- Does not damage O-rings and seals
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Can be used in R134a, R1234yf and R744 air-conditioning systems as well as in air-conditioning systems with electric compressors (hybrid, start/stop and electric vehicles) for reliably detecting of leaks and micro-leaks.
Contents | 240 ml |
Weight of content | 121.91 g |
Chemical basis | Polyolester oil |
Smell/fragrance | Characteristic |
Density | 0.92 g/cm³ |
Shelf life from production | 60 Month |
Min. flashing point | 221 °C |
Water-soluble | 0 - not applicable |
Viscosity/consistency | Liquid |
Boiling point | 200 °C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!